Pagsunod sa Kaligtasan sa Kaligtasan at Pag-verify ng Halogen para sa LSZH Compounds para sa Mga Kable ng Komunikasyon

Sa pandaigdigang merkado para sa mga network ng imprastraktura at komunikasyon, ang pagtutukoy ng ** LSZH Compounds para sa mga cable ng komunikasyon Ang ** ay isang hindi napagkasunduang kinakailangan na hinimok ng mahigpit na mga regulasyon sa kaligtasan ng sunog. Ang paggamit ng mababang usok zero halogen material ay pinipigilan ang paglabas ng siksik na usok at kinakaing unti -unti, nakakalason na gas sa panahon ng pagkasunog, pagprotekta sa buhay ng tao at sensitibong elektronikong kagamitan. Para sa mga tagagawa ng cable, ang pag-verify ng pagsunod ay nangangailangan ng mahigpit na ** Halogen-free compound na pagsubok ** mga pamamaraan at pagsunod sa mga tiyak na ** lszh mababang density ng usok ** mga kinakailangan. Ang Hangzhou Meilin New Mater Technology Co, Ltd, na may higit sa 30 taong karanasan at 31 advanced na mga linya ng produksyon sa buong tatlong halaman, ay dalubhasa sa paggawa ng mga de-kalidad na mga compound ng LSZH, tinitiyak ang pagsunod at mahusay na pagganap para sa parehong mga customer at internasyonal na mga customer.

ML- TH9002B2 Thermoplastic LSZH Flame- Retardant B2CA grade sheath material

Halogen-free verification at toxicity

Ang pangunahing prinsipyo ng LSZH ay ang pag -aalis ng lubos na kinakaing unti -unting mga produkto ng pagkasunog.

Pagpapatupad Halogen-free compound na pagsubok mga pamamaraan

To confirm that a product qualifies as halogen-free, rigorous **Halogen-free compound testing** procedures must be conducted, primarily the IEC 60754 series. This involves burning the material under controlled conditions and measuring the acidity (pH) and conductivity of the resulting combustion gases. The standard mandates that the pH value must be above $4.3$ (indicating low acidity) and the conductivity must be below $10 \mu\text{S}/\text{mm (indicating minimal ionized corrosive content). This ensures the material does not pose a threat to people or cause corrosion damage to nearby infrastructure.

Comparing Halogenated vs. Halogen-Free Compounds

The chemical difference between traditional and modern compounds is vital. Standard materials like PVC rely on chlorine (a halogen) to achieve fire retardancy, but combustion releases highly toxic and corrosive Hydrogen Chloride (HCl) gas. **LSZH Compounds For Communication Cables**, conversely, achieve flame retardancy through large loadings of metal hydroxides (e.g., magnesium hydroxide). When heated, these hydroxides decompose endothermically, releasing water vapor to cool the flame and forming a protective char layer, effectively eliminating acid gas release.

Comparison: Compound Type vs. Acid Gas Emission and Environmental Impact:

Flammability and Smoke Density Control

Beyond acid gas, controlling the spread of fire and maintaining visibility are crucial safety factors.

Interpreting Flammability testing standards for cable jackets

Verification of flame spread resistance relies on strict **Flammability testing standards** such as IEC 60332. The single cable vertical flame test (IEC 60332-1-2) confirms that the jacket material is self-extinguishing and will not propagate the flame. For large installations, more demanding bundle tests (IEC 60332-3) are required. B2B buyers should also review the Limiting Oxygen Index (LOI) of the compound; a higher LOI value (typically $> 30\%$) indicates a stronger resistance to ignition and combustion.

Meeting stringent LSZH low smoke density requirements

The primary threat in enclosed fires is smoke inhalation and loss of visibility, which hinders evacuation. The IEC 61034 standard dictates how **LSZH Compounds For Communication Cables** must perform regarding smoke emission. The test measures the percentage of light lost over a specified path length when the cable is combusted. Achieving **LSZH low smoke density** requirements means the material must maintain a high percentage of light transmittance (typically $> 60\%$) throughout the test, a key performance metric for **LSZH materials for data cable** jacketing used in tunnels and subways.

Manufacturing Considerations and Performance

Compound processability is tied directly to manufacturing efficiency and final product quality.

Processing characteristics of LSZH for high-speed extrusion

The **Processing characteristics of LSZH** are inherently complex due to the heavy loading of non-polymeric mineral fillers required for fire retardancy. This high filler content affects the compound's viscosity and melt strength. Manufacturers must select compounds specifically optimized for high-speed extrusion lines. Poor **Processing characteristics of LSZH** can lead to extruder surging, material degradation, and surface roughness on the final cable jacket, requiring specialized extrusion equipment and precise temperature control.

Applying LSZH materials for data cable jacketing

When using **LSZH materials for data cable** jacketing (e.g., Cat 6, Cat 7), the compound must meet two sets of demanding criteria: fire safety *and* electrical performance. **LSZH Compounds For Communication Cables** used for high-frequency data transmission must have a stable, low relative permittivity and low dissipation factor to minimize signal attenuation and maintain the necessary bandwidth capacity. Compromising on the electrical properties of the **LSZH materials for data cable** jacketing for the sake of fire performance is unacceptable in modern networks.

Conclusion

Sourcing **LSZH Compounds For Communication Cables** is a critical engineering decision that balances fire safety compliance with manufacturing efficiency. Success depends on selecting materials that have passed stringent **Halogen-free compound testing** procedures, meet demanding **LSZH low smoke density** requirements, and exhibit excellent **Processing characteristics of LSZH**. Hangzhou Meilin New Material Technology Co., Ltd. leverages its technological expertise, advanced production lines, and commitment to R&D to provide high-quality **LSZH materials for data cable** jacketing and other specialized compounds that consistently meet global **Flammability testing standards** and performance expectations.

Frequently Asked Questions (FAQ)

• What is the key chemical mechanism that enables **LSZH Compounds For Communication Cables** to reduce smoke? **LSZH Compounds For Communication Cables** often contain high loadings of inorganic metal hydroxides (like Al(OH)}_3$ or Mg(OH)}_2$). When exposed to heat, these compounds release water vapor and form a dense char layer, which acts as a barrier to suppress smoke formation.
• Ano ang karaniwang katanggap-tanggap na saklaw para sa pH sa ** halogen-free compound na pagsubok ** Mga Pamamaraan (IEC 60754-2)? Ang pamantayang IEC 60754-2 ay nangangailangan na ang pH ng may tubig na katas mula sa mga gas ng pagkasunog ay dapat na mas malaki kaysa sa $ 4.3 $ upang maituring na sumusunod at hindi nakakaugnay.
• Why is the **Pagproseso ng mga katangian ng LSZH** often more difficult than PVC? **LSZH Compounds para sa mga cable ng komunikasyon** contain significantly higher volumes of inorganic solid fillers (up to $60\%$) required for fire suppression. This high filler content increases the compound's viscosity, making it more difficult to process smoothly and rapidly on high-speed extrusion lines compared to unfilled or lightly filled PVC.
• How does the choice of **Mga materyales sa LSZH para sa cable ng data** Jacketing affect Cat 6A performance? Mataas-speed data cables require jackets with a low, stable Dielectric Constant ($K$) to minimize signal loss (attenuation). If the **LSZH materials for data cable** jacketing formulation has a high $K$ value or inconsistent mixing, it can degrade the cable's impedance and fail to meet Cat 6A transmission mga kinakailangan.
• Is passing the IEC 60332-1 test sufficient for a **LSZH mababang density ng usok** claim? Hindi. Ang pagpasa ng IEC 60332-1 (Vertical Flame Spread) ay nagpapatunay lamang sa retardancy ng apoy. Ang ** lszh mababang usok ng usok ** ang pag -angkin ay dapat na mapatunayan nang hiwalay gamit ang pamantayan ng IEC 61034, na sumusukat sa light transmittance sa panahon ng pagkasunog.